News Center

Industry news

Company news

News

Introduction of powder metallurgy tap coating

Introduction of powder metallurgy tap coating

Introduction of powder metallurgy tap coating The coating steam oxidation of the powder metallurgy tap: After the powder metallurgy tap enters the high temperature water vapor, a layer of oxide film is formed on the surface, which is well adsorbed on the coolant, which can reduce friction and prevent the bonding between the tap and the cutting material. Suitable for processing low carbon steel.

27

2022

/

12

Application of powder metallurgy tap

Application of powder metallurgy tap

Application of powder metallurgy taps: The grinding parameters of powder metallurgy taps are not suitable; the workpiece material is too hard; the tap grinding quality is poor, and the cutting fluid is improperly selected; the cutting speed of the tap thread is too fast. The faucet is badly worn. Appropriately increase the tap rake angle, reduce the cutting taper;

22

2022

/

12

Introduction of deep hole machining tool?

Introduction of deep hole machining tool?

The emergence and development of any industry is inseparable from the progress of science and technology, which is also the promotion of the industry caused by the continuous expansion of market demand, and promotes the continuous upgrading of products by relevant personnel. Then in the processing industry, this requirement is even more. For example, the processing of deep hole processing tools is also moving from traditional technology to more advanced technology processing, so what are its characteristics? At the same time, what should we pay attention to when using it?

02

2022

/

12

Deep hole machining tool problem solving method?

Deep hole machining tool problem solving method?

The emergence and development of any industry is inseparable from the progress of science and technology, which is also the continuous expansion of market demand to promote the industry, prompting relevant personnel to constantly update products, so the development of deep hole machining tools is also happening. rapid change. Below we will introduce in detail the solution to the problem of deep hole machining tools. I hope it helps.

22

2022

/

11

The use of deep hole machining tools?

The use of deep hole machining tools?

Every kind of thing has its value. In our daily life, there are many things and products that cannot be separated from it. So in the industrial field, there are a lot of machinery and equipment in different areas to play their role, deep hole machining tool is no exception, today we will talk about the use of deep hole machining tool.

14

2022

/

11

Classification and characteristics of powder metallurgy taps

Classification and characteristics of powder metallurgy taps

Cutting powder metallurgy tap straight groove tap: used for through hole, blind hole processing, tap groove in the use of iron filings, the processing of the thread work quality level is not high, mostly used for processing short chips, such as gray cast iron.

02

2022

/

11

Introduction to the use of powder metallurgy taps

Introduction to the use of powder metallurgy taps

The extrusion cone at the front end of the powder metallurgy tap is a tapered thread. In order to reduce friction and extrusion pressure, the cross-section of the powder metallurgy tap is made into a polygon. High extrusion tap strength.

24

2022

/

10

Introduction of Coating for Powder Metallurgy Tap

Introduction of Coating for Powder Metallurgy Tap

Coating steam oxidation of powder metallurgy taps: After the powder metallurgy taps enter high temperature water vapor, a layer of oxide film is formed on the surface, which has good adsorption on the coolant and can reduce friction. At the same time, it prevents the bonding between the tap and the cutting material. Suitable for processing low carbon steel.

13

2022

/

10

< 1...345...10 >