What are the characteristics of three-dimensional drill?

Release time:

2023-02-10

The trend of the times promotes the continuous progress of society, and industrial production is more convenient and efficient. The use of three-dimensional drill not only improves work efficiency, but also brings people a better production experience. With the development of society, people's ideas have changed. Three-dimensional drill has made great efforts in the market development to promote its better growth in the market.

The trend of the times promotes the continuous progress of society, and industrial production is more convenient and efficient.three-dimensionalDrillThe use of not only improves work efficiency, but also brings people a better production experience. With the development of society, people's ideas have changed. Three-dimensional drill has made great efforts in the market development to promote its better growth in the market.

Three-dimensional drilling conforms to the diversified development of the times. Meeting market demand is its value. The high-tech era makes people's lives full of vigor and vitality. Driven by science and technology, CNC three-dimensional drilling technology has developed rapidly. It is technically strict with itself and keeps up with the trend of the times in innovation. In such a good situation, three-dimensional drill manufacturers also analyzed the market and developed a series of new equipment. CNC three-dimensional drilling has brought greater economic benefits for enterprises.

Three-dimensional drill features are as follows:

1. All coordinate movements are driven by servo motors, which is convenient, flexible and stable in accuracy.

2. The basic layout is as follows: the sliding seat runs through the entire length of the bed, and one side is open. The structure is simple and convenient, which is convenient for the upper and lower installation of the workpiece and the cleaning after work. Easy maintenance, small footprint, suitable for long workpiece processing and production.

3. The column on the frame is the same as the ordinary radial drilling machine. The rocker arm can be raised and lowered to facilitate the handling of workpieces of different heights.

4. The spindle has 16 speed changes, and the cutting torque is doubled. This is a Morse tapered hole where the drill bit can be mounted directly.

5. The bed is a casting structure, which can be lengthened in sections. User can select or customize.

6. The X-axis is the frame, using German imported reducer, gear and rack to ensure the rigidity and accuracy of the movement.

7. There is no protective pull plate on the rail of the bed to ensure that the frame, grating ruler and electromechanical switch are not contaminated from the outside.

8.X axis adopts imported original grating ruler to ensure X axis positioning accuracy.

9. Western system, AC servo, rare earth permanent magnet motor, excellent performance, high reliability, safe and durable.

10. Ultra-thin LCD screen, oil-proof keyboard, elegant appearance.

　　three-dimensionalDrillOnce a failure occurs, it is a headache for many people. When the manufacturer's maintenance is delayed, it is difficult for technicians who specialize in maintenance in their factories to find out the cause and location of the failure. The following are some diagnostic methods for the failure of the steel drilling machine.

1. Inquiry: Carefully inquire about the process, phenomenon and result of the failure, the abnormal situation when the drilling rig is started, and compare the accuracy and changes of the workpiece before and after the failure.

2. Visual inspection: check whether the working state of each part of the drilling rig is normal (such as the direction of each coordinate axis, spindle, tool magazine, manipulator, etc.), and whether each electronic control equipment (such as system, temperature control equipment, smoothing equipment, etc.) has alarm indication; Check whether some parts burn safely, whether parts burn and crack, whether wires and cables fall off, and whether the direction of each operating component is correct.

3. Contact: When the whole machine is powered off, the cause of the fault can be found by contacting the equipment of each primary circuit board, the connection of each plug and socket, and the connection of each power supply and signal line.

4. Listen and sniff: listen to whether the power adapter, impedance adapter and reactor "ring" due to vibration caused by basic iron relaxation, whether the switches and contacts work abnormally, whether there is abnormal work of engine equipment, compressed air control, and hydraulic control.